The Marshall Stability Tester is used by highway departments, contractors, engineers, testing laboratories and other government agencies to determine the stability and flow value of the bituminous mixture. It can accurately judge the failure point of bituminous mixture to provide a basis for the design of the ratio of bituminous mixture, and can also be used to test the construction quality of asphalt pavements.
STANDARD
- ASTM D1559, D5581 (6" DIA. SPECIMENS)
- AASHTO T245
- NF P98-251-2
- CNR NO. 30
Get Wholesale Price
The Marshall Stability Tester is used by highway departments, contractors, engineers, testing laboratories and other government agencies to determine the stability and flow value of the bituminous mixture. It can accurately judge the failure point of bituminous mixture to provide a basis for the design of the ratio of bituminous mixture, and can also be used to test the construction quality of asphalt pavements.
TECHNICAL PARAMETERS
LD-5
Max Capacity: 50 KN
Test Rate: 50.8 mm/min
Cross Head Travel: 70mm
Displacement Probe Travel: 15mm
Vertical/ horizontal Clearance: 300mm/270mm
Marshall Stability Mould: 4” Diameter, 6” Diameter(optional)
Dimension: 590X310X750mm, approx.90kg
Power: 220V, 50/60Hz, 1 ph, 0.5Hp,2.3A
LD-6
Loading rate:50±5mm/min
Indenter diameter:101.6±0.16 mm 152.4±0.2 mm
Pressure measuring range:30/50kN, accuracy 1%
Flow value range:0‑15.00mm, accuracy±0.1mm
Ambient temperature:≤30 ℃
Relative humidity:≤85%
Total power:1000W
Power supply:220VAC±10%, 50Hz
Dimensions:350×450×800mm
Weight:100kg
