FT-A, FT-M
The flow table is used for determining the consistency of cement mortars. The motor operated models are driven by a motor speed reducer and the number of drops are shown on the counter, which stops automatically the machine at the end of the cycle.
STANDARD
- EN 1015-3
- ASTM C230
- EN 495-2
Get Wholesale Price
Motorized flow table FT-A
It is used for determining the consistency of cement mortars. The motor operated models are driven by a motor speed reducer and the number of drops are shown on the counter, which stops automatically the machine at the end of the cycle. Supplied complete with flow mould and tamper.
Manual flow table FT-M
A specimen contained in a cone mould is placed on a metal surface which then is raised and dropped from a known height after releasing the specimen from the mould.
TECHNICAL PARAMETERS
Motorized flow table FT-A
Weight of vibrating part: 4.35±0.15 kg
Height of drop: 10±0.1 mm
Vibrating frequency: 1 HZ
Working cycle: 25 S
Table diameter: 300±1 mm
Dimension: 400×400×690 mm
Net weight: 25 kg
Manual flow table FT-M
Standard: ASTM C230
Diameter of Table: 254 mm
Height of Drop: 12.7 mm
Bronze Cone Base: Dia.100 x Top Dia.70 x High 60 mm
Approx. Weight 15 kg
