XS2019-8

XS2019-8 Computer-controlled Vicat needle apparatus is an automatic testing equipment for determination of the setting time of cement. It has 8 measuring points, automatically tests the cement setting by imitating manual testing, and automatically prints experimental data and measurement results without manual intervention during the testing process. It can completely replace the manual test process and the functions of constant temperature and humidity chamber.
After 240 sets of automatic and manual synchronization time comparison tests, the relative error rate of the XS2019- 8 is less than 1%, which proves that its test accuracy and reliability. The initial setting and final setting test depth error is ±0.05mm, and the measurement hole spacing error is ±0.1mm. The identification error of the cement slurry surface is less than 0.05mm (not affected by the smoothness of the cement slurry surface). Replacing new samples at any position during the test will not affect the normal testing of other samples. The operators can check and query the current test status on the screen.

TECHNICAL PARAMETERS

Power supply: 220V/50Hz, power of constant temperature and humidity system: 50W
Measuring point: 8, automatic alarm when the time for each mould is up.
Needle: 2 pcs, diameter 1.13±0.5mm, weight 300±1g
Vicat mould: 8 sets, 65/75 dia. x 40 mm
Base plate: 8 pcs, metal, 3mm
Working environment: No dust, strong electricity, strong magnetism and strong electric wave interference.
Functions: Automatic detection and correction function/Fault alarm function
Test chamber temperature: 20 ±1, humidity: 90% (automatic control)
Measuring range: 0-50mm, accuracy 0.1mm
Dimensions: 900*500*640mm
Weight: 65KG

Brochure.pdf