CY series
Test procedures require that specimens are cast in a number of standard sizes convenient for compressive and flexural strength determination. The engineering tolerances specified for moulds are very stringent and the internal finish of the surface must be of a high order to comply with the recommendations laid down in many international standards. Moulds must not deform during manufacture of concrete specimens if the specimen dimensions are to be maintained.
STANDARD
- ASTM C39, C192
- AASHTO T23, T126
Get Wholesale Price
CY-MC CAST IRON CYLINDER MOULD
This type cylinder mould is made of cast iron and surface is coated black or blue and the inner surface is all grinded by the lathe. It’ s very heavy.
CY-CW STEEL CYLINDER MOULD
CY-MS STEEL CYLINDER MOULD
These moulds are constructed of plated steel for rust resistance and are dimensionally stable under severe use. Moulds are split along one side with 2 quick-acting clamps welded to mould. When open, mould springs apart slightly to allow specimen removal. Include detachable base plate.
CY-MP PLASTIC CYLINDER MOULD
Plastic concrete test cylinder mould is reusable and sturdy in this range, it is light and easy to carry, made in collapsible-two parts for quick to install. It will not rust and easy to maintain.
CY-PP PLASTIC CYLINDER MOULD
The air gun is generally used for demoulding. 
CM-PU150 POLYURETHANE CYLINDER MOULD
A one piece mould manufactured from a robust plastic which is resistant to shock and abrasion. Ideal for field use, the specimen is ejected from the mould by compressed air requiring only a simple clean and oiling before being ready for use again. Meets the requirements of EN 12390-1.
TECHNICAL PARAMETERS
CY-MC CAST IRON CYLINDER MOULD
CY-MC100 dia.100×200mm 9kg
CY-MC150 dia.150×300mm 17kg
CY-MC160 dia.160×320mm 22kg
CY-CW STEEL CYLINDER MOULD
CY-CW100 dia.100×200mm 9kg wall thickness 5mm
CY-MS STEEL CYLINDER MOULD
CY-MS50 dia.50×100mm 1kg
CY-MS100 dia.100×200mm 9kg
CY-MS150 dia.150×300mm 16kg
CY-MS160 dia.160×320mm 18kg
CY-MP PLASTIC CYLINDER MOULD
CY-MP/A(with bolt) dia.100×200mm 0.89kg
CY-MP/B(with clip) dia.100×200mm 0.92kg
CY-MP/C(with bolt) dia.150×300mm 1.76kg
CY-PP PLASTIC CYLINDER MOULD
CY-PP150 dia.150×300mm 1.0kg
CM-PU150 POLYURETHANE CYLINDER MOULD
CM-PU150 dia.150×300mm 1.9kg
Specimen clamping tool ST-L150
Tryout size：150x300 mm
Weight:1.67kg
